javorogenukac
Posts 20
|
Product Name:High Quality Manul Bottle Blowing Machine Manufacturer
Product Description:
high quality manul bottle blowing machine manufacturerSpecification Product NameAutomatic Mineral Water Pet Bottle Blowing MachineItem TypeBottle Blowing MachinePlace of OriginJiangsu, China (Mainland)ModelKM-A4Productivity3200-4000PCS/H, depend on bottle designProduct typeBody diameter20mm-100mmHeight50mm-350mmNeck diameter15mm-38mmMoldCavity4cavitiesMold thick240mmMold500*500mmMain machine powerElectrical source power380v 3Phase /220v 3Phase ?50/60HZRated Power49kwReally use power14kwAir sourceLP air compressor1.6m3/min 1.0MPa 1set (15KW)HP air compressor1.0m3/min 3.0MPa 2setsAir dryer2.0m3/min 3.0MPa 1setCooling water15L/minSizeL*W*H1908*1858*1920mmWeight3600kgpreform unscramblerL*W*H2000*950*2480mmWeight250kgResin availablePETApplicationCertificationCE SGS ISOWarranty1 yearProduct Description Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. KM Automatic High Speed Water Bottle Blowing Molding Machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. Advantages???1). Stable performance with advanced PLC.
?2). Automatic preform conveyer to save human cost.
?3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
?4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
?5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
?6). Introduce the FESTO air cylinder to avoid contamination and noise.
?7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
?8). Strong clamping force with high pressure and double crank links to lock the mould.
?9). Two ways of operating: automatic and manual.
?10). Safe\reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
?11). Low cost\high efficiency\easy operation and maintenance etc, profited from the fully automatic technological process.
?12). Ideal cooling system make the finished bottles without any flaws.
?13). Easy for you to install\test and start up.
?14). Low rejection rate: less than 0.2 percent.?Packaging & ShippingRelated ProductsCompany Information Zhangjiagang King Machine Co., Ltd,is a direct manufacturer and exporter specializing in water treatment plants, beverage filling machine, packing machine, bottle blowing machine, injection ? moulding machine and spare parts of filling line. Our factory was established in the year of 1995, with the long history of accumulated experience in filling machine industry in south Jiangsu. There are many development engineer of filling machine in our company. We devote ourselves to the development, research and production of liquid food and beverage packing and filling industry. King Machine cooperated with many customers in recent years, we win the trust of customers from our high-quality products. And we are looking forward to the future cooperation with you if our products can impress you deeply. Cooperate Clients ?After Sale Service ?1. We send the engineers to help installing, commissioning and training, the engineers start from our factory area. 2. We supply below necessary documents with the machine: a. Machine layout b. Electricity diagram c. Machine certificate d. General manual book/maintenance book
Price:10.00
Product Website:http://www.liquidpackingmahine.com/bottle-blowing-machine/semi-automatic-bottle-blowing-machine/high-quality-manul-bottle-blowing-machine-manu.html
Company Description
Zhangjiagang king machine Co., Ltd
Address:JiangsuJiangsuZhangjiagangLuyuan800 meters west of S338 Luyuan Cross Bridge, Zhangjiagang City, Jiangsu
Descption:Zhangjiagang King Machine Co.,Ltd.was founded in 1995,and starting with beverage machinery.It is located at 800 meters west of S338 Luyuan Cross Bridge, Zhangjiagang City Jiangsu,We devote ourselves to the development, research and production of liquid food and beverage packing and filling industry.
Our main products include: mineral water and purified water producing line, carbonated beverage producing line. 3 gallons& 5gallons producing line. Plat and tube UHT device, and CIP system. All the products are sold well in every province and city of the whole country and also exported to about thirty countries and areas with strong technical force, advanced equipment, scientific management system and perfect after-sales service.
Welcome to visit our company.Thank you!
Registered Capital:150
EmployeeNum:85
Zhangjiagang king machine Co., Ltd
Contact:kaiwen Feng
Telphone:86-512-58178676-0
Fax:86-512-58178676-0
Email:kingmachine@aliyun.com
Company Website:http://www.liquidpackingmahine.com
|