navigate  
  Home
Contact Us
Store
Library
Forums
 
     

  Forums

Forums » Customization » CDE for Standard A-Series mold base. Messages in this topic - RSS
|
11.08.2008 17:07:55
filesRus
filesRus
Posts 6

Would anyone have an interest in purchasing a CDE that will generate a Standard A-Series mold base with 2-D plan views, section views and the 3-D solids for the base?  It will also help assist in pulling electrodes by automatically adding shanks to the detail part of the electrode, adding center lines to the shank and trode, and ask the user to select a face to mark with an "X".  fficeffice" />


There are many tools to help the user with as far as an organized level structure for the view and you can toggle the view via buttons in the CDE, so if you wanted to look at the front section view, you would just hit a button.  The user must place the geometry for the components onto a specific level if they want it to show up in the view.


Let me know if there is any interest out there for something like this.  Right now it is in development for KC 6.0 and KC 7.0.

Thanks for your time.
Matt

--
Matt
pages: 1
|

Forums » Customization » CDE for Standard A-Series mold base.